Minimalist systems and smaller squares
The trend towards minimalist joinery systems with small chambers often limits the accessibility of brackets, which is why brackets are available in both retractable pivot and locking brackets with 3 and 5 mm nipples with dimensions starting at 6 mm.
Reduced Spring Pivot – The spring bracket with reduced 4.5 mm pin allows the assembly of minimalist joinery. Its retractable nipple facilitates mounting inside the small profile. In addition, it is made of extruded 6063 aluminum, avoiding the risk of corrosion, especially in marine environments.
The locking bracket with a reduced Ø3 socket allows the assembly of minimalist carpentry. Its reduced nipple facilitates the assembly and machining of small dimensions. In addition, it is made of extruded 6063 aluminum, avoiding the risk of corrosion, especially in marine environments.
In the minimalist sliding profiles, Anudal solves the straight cut joint between vertical and horizontal profiles where a square or self-tapping joint is not possible, with a floating pivot and stainless steel screw.
stainless.
Some profiles have limitations when it comes to the machining of the studs; for this reason, it is only possible to install an angle with a completely lateralized stud. To avoid deformations in the squareness, Anudal has its own nipple milling system.
Anudal has a wide range of profiles for the manufacture of brackets with a reduced minimum production batch. In addition, its brackets are made of extruded aluminum, a 100% sustainable, recyclable and corrosion-free material.
